- No 58A, Baltimore Street, USA
- Grid
- List
- 1
- 2
- 3
- 4
- Left Thumb
- Right Thumb
-
Islandaire EZ Series 16 is a replacement for the American Air Filter models of ENR, ENH, WY and YY units. Our commercial duty construction with heavy gauge galvanized steel and superior components create an efficient reliable unit. This design eliminates the need for any interior or exterior renovation. Available in cooling-only and cooling plus hydronic heat models
- Cooling from: 7700-12000 Btu
- Heating: 6300-17070 Btu
- Comfort & Dehumidification
- Quiet operation
- Intuitive digital or analog controls
- Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
- Separate thermostat settings (limiting) for cooling and heating nodes (digital only)
- Samples the room temperature in intervals to monitor and maintain desired temperature
- Optional constant fan mode for additional comfort options
- Sound Reduction
- New 2-motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
- The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
- Permanently lubricated dual motors reduce noise
- High-density insulation helps keep outdoor noise outside
- Commercial Grade Construction
- Islandaire’s advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
- Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
- Permanently lubricated fan motors
- Tamper-resistant grille
- Durable, powder coat paint finish
- Health and IAQ
- Fresh-air vent
- Washable, antimicrobial filters
- Energy Usage: Management
- Set separate heat and cool range limits (digital only)
- Desk control ready
- Energy Management System Compatible
- Maintenance and Installation Features
- Service error codes for quick diagnostics
- May be installed flush with floor
- Reversible indoor air louvers
- Improved weather barrier
- Nationwide Service Network
- Modular design and pop out wiring modules
-
The EZ Series 26 units are designed and manufactured for new construction or the replacement of 26″ packaged terminal air conditioning units in an existing building. The product is designed for individually-zoned comfort controlled heating and cooling. We offer our chassis to operate in cooling only, cooling with electric heat, and cooling with heat pump with backup electric heat. The design standards, heavy duty construction and the focus on indoor noise reduction has created our unit as the premier unit of the future. Replacement for the Amana PB Series 26″ unit, the GE AJ Series 26″ unit, the Friedrich 27″ Wallmaster unit* and the Fedders 27″ unit*. (*requires kit #4090846).
Available in cooling-only and cooling plus heat pump models
- Cooling from: 7700-12000 Btu
- Heating: 6300-17070 Btu
- Comfort & Dehumidification
- Quiet operation
- Intuitive digital controls with optional hand held remote
- Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
- Samples the room temperature in intervals to monitor and maintain desired temperature
- Optional constant fan mode for additional comfort options
- Sound Reduction
- New motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
- The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
- Permanently lubricated dual motors reduce noise
- New elongated fan moves air over a wider area so it’s quieter
- Fan turns on before the compressor starts to muffle the sound
- High-density insulation helps keep outdoor noise outside
- Commercial Grade Construction
- Islandaire’s advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
- Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
- Random compressor resistant protectselectrical systems
- Indoor coil frost sensor protects the compressor
- Durable front panel with break-proof control door and design
- Permanently lubricated fan motors
- Tamper-resistant grille
- Durable, powder coat paint finish
- Health and IAQ
- Fresh-air vent
- One washable, antimicrobial filter
- Energy Usage: Management
- Set separate heat and cool range limits
- Desk control ready
- Energy Management System Compatible
- Electronic defrost control
- Maintenance and Installation Features
- Service error code storage
- May be installed flush with floor
- Reversible indoor air louvers
- Improved weather barrier
- Nationwide Service Network
- Modular design and pop out wiring modules
-
Islandaire EZ Series 40 is a replacement for the American Standard models of Type SR 40 units. Our commercial duty construction with heavy gauge galvanized steel and superior components create an efficient reliable unit. This design eliminates the need for any interior or exterior renovation. Use of the existing wall sleeve-cabinet and louver saves time and money, two very important factors in today’s competitive environment! Hydronic coil package available. Hydronic coil must be replaced with Part #: 4090062.
Available in cooling and hydronic heat models
- Cooling from: 7700-15000 Btu
- Heating: 6300-17000 Btu
- Comfort & Dehumidification
- Quiet operation
- Intuitive digital or analog controls
- Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
- Separate thermostat settings (limiting) for cooling and heating modes (digital only)
- Samples the room temperature in intervals to monitor and maintain desired temperature
- Optional constant fan mode for additional comfort options
- Reversible indoor air louvers for an additional airflow direction option
- Sound Reduction
- New dual motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
- The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
- Permanently lubricated dual motors reduce noise
- New tangential fan moves air over a wider area so it’s quieter
- Fan turns on before the compressor starts to muffle the sound
- High-density insulation helps keep outdoor noise outside
- Commercial Grade Construction
- Islandaire’s advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
- Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
- Indoor coil frost sensor protects the compressor
- Permanently lubricated fan motors
- Tamper-resistant grille
- Durable, powder coat paint finish
- Health and IAQ
- Fresh-air vent
- Washable, antimicrobial filters
- Energy Usage: Management
- Set separate heat and cool range limits (digital only)
- Desk control ready
- Energy Management System Compatible
- Maintenance and Installation Features
- Service error codes for quick diagnostics
- May be installed flush with floor
- Reversible indoor air louvers
- Improved weather barrier
- Nationwide Service Network
- Modular design and pop out wiring modules
-
The EZ Series 42 units are designed and manufactured for new construction or the replacement of Amana, GE, Friedrich, LG, and Trane PTAC units in an existing building. The product is designed for individually-zoned comfort controlled heating and cooling. The unit width is an industry standard 42”. We offer our cooling chassis to operate with cooling only or heat pump with back up electric heat, or just straight electric heat. The design standards, heavy duty construction and the focus on indoor noise reduction has created our unit as the premier unit of the future. Standard warranty is a one year parts and labor including a five year sealed system warranty.
Available in cooling-only and cooling plus heat pump models
- Cooling from: 7700-15000 Btu
- Heating: 6300-17000 Btu
- Comfort & Dehumidification
- Quieter operation
- Intuitive controls
- Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
- Separate thermostat settings (limiting) for cooling and heating nodes
- Samples the room temperature every 9 minutes to monitor and maintain desired temperature
- “Instant Heat” in heat pump mode quickly heats a room to the desired temperature
- Dehumidification mode removes up to 3.2 pts per hour
- Optional constant fan mode for additional comfort options
- Reversible indoor air louvers for an additional airflow direction option
- Sound Reduction Technology
- New 2-motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
- The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
- Permanently lubricated dual motors reduce noise
- New elongated fan moves air over a wider area so it’s quieter
- Fan turns on before the compressor starts to muffle the sound
- High-density insulation helps keep outdoor noise outside
- Commercial Grade Construction
- Islandaire’s advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
- Faultless surehold Front cover system attaches securely
- Room Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
- Random compressor resistant protects electrical systems
- Indoor coil frost sensor protects the compressor
- Durable front panel with break-proof control door and design
- Permanently lubricated fan motors
- Tamper-resistant grille
- Durable, powder coat paint finish
- Health and IAQ
- Fresh-air vent
- Two washable, antimicrobial filters
- Energy Usage: Management
- Set separate heat and cool range limits
- Desk control ready
- Energy Management System Compatible
- Electronic defrost control
- Maintenance and Installation Features
- Service error codes for quick diagnostics
- May be installed flush with floor
- Improved weather barrier
- Nationwide Service Network
- Modular design and pop out wiring modules
-
Islandaire EZ Series 45 is a replacement for the American Standard Carteret Remington and Singer models of Type 45 units. Our commercial duty construction with heavy gauge galvanized steel and superior components create an efficient reliable unit.This design eliminates the need for any interior or exterior renovation. Use of the existing wall sleeve-cabinet and louver saves time and money, two very important factors in today’s competitive environment! If the need does occur where the wall sleeve-cabinet and/or louver needs to be replaced, we manufacture these accessories as well.
Available in cooling-only and hydronic heat models
- Cooling from: 7000-15000 Btu
- Heating: 7100-14800 Btu
- Comfort & Dehumidification
- Quieter operation
- Intuitive controls
- Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
- Separate thermostat settings (limiting) for cooling and heating nodes
- Samples the room temperature every 9 minutes to monitor and maintain desired temperature
- “Instant Heat” in heat pump mode quickly heats a room to the desired temperature
- Dehumidification mode removes up to 3.2 pts per hour
- Optional constant fan mode for additional comfort options
- Reversible indoor air louvers for an additional airflow direction option
- Sound Reduction Technology
- New 2-motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
- The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
- Permanently lubricated dual motors reduce noise
- New elongated fan moves air over a wider area so it’s quieter
- Fan turns on before the compressor starts to muffle the sound
- High-density insulation helps keep outdoor noise outside
- Commercial Grade Construction
- Islandaire’s advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
- Faultless surehold Front cover system attaches securely
- Room Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
- Random compressor resistant protectselectrical systems
- Indoor coil frost sensor protects the compressor
- Durable front panel with break-proof control door and design
- Permanently lubricated fan motors
- Tamper-resistant grille
- Durable, powder coat paint finish
- Health and IAQ
- Fresh-air vent
- Two washable, antimicrobial filters
- Energy Usage: Management
- Set separate heat and cool range limits
- Desk control ready
- Energy Management System Compatible
- Electronic defrost control
- Maintenance and Installation Features
- Service error code storage
- May be installed flush with floor
- Reversible indoor air louvers
- Improved weather barrier
- Nationwide Service Network
- Modular design and pop out wiring modules
-
Islandaire EZ Series 5R is a replacement for Ice Cap 5R units. Our commercial duty construction with heavy gauge galvanized steel and superior components create an efficient reliable unit.This design eliminates the need for any interior or exterior renovation. Use of the existing wall sleeve-cabinet and louver saves time and money, two very important factors in today’s competitive environment! If the need does occur where the wall sleeve-room cabinet and/or louver needs to be replaced, we manufacture these accessories as well.
Available in cooling-only and cooling plus hydronic heat models
- Cooling from: 7000-15000 Btu
- Heating: 6800-15000 Btu
- Comfort & Dehumidification
- Quiet operation
- Simple yet intuitive controls
- The unit monitors room temperature and provides heat as needed (freeze protection)
- Separate thermostat settings (limiting) for cooling and heating nodes
- Samples the room temperature every 9 minutes to monitor and maintain desired temperature
- Dehumidification removes up to 3.2 pts per hour
- Optional constant fan mode for additional comfort options
- The fan will not turn on until the unit’s heat exchanger has warmed up, eliminating the discomfort of cold air being brought into the room
- Sound Reduction Technology
- New fan design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
- The unit compressor is mounted on vibration isolators, which absorb vibration-causing noise
- Permanently lubricated motors reduce noise
- New tangential fan moves air over a wider area so it’s quieter
- Fan turns on before the compressor starts to muffle the sound
- High-density insulation helps keep outdoor noise outside
- Durability
- Advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
- Steel front cover system which attaches securely
- Room Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
- Overload on compressor protects its electrical systems
- Indoor air sensor protects the compressor
- Permanently lubricated fan motors
- Tamper-resistant grille
- Durable, powder coat paint finish
- Life time warranty on the stainless steel heat exchanger
- Health and IAQ
- Fresh-air vent (motorized is optional)
- Washable, antimicrobial filters
- Energy Usage: Management
- Set separate heat and cool range limits
- Controls can integrate with most remote thermostat systems that are energy conscious
- Maintenance and Installation Features
- Service error codes
- Reversible indoor air louvers
- Improved weather barrier
- Nationwide Service Network
- Modular design and pop out wiring modules
-
Islandaire EZ Series AD is a replacement for the Friedrich Climate Master and Weil-McLain models of 700AD units. Our commercial duty construction with heavy gauge galvanized steel and superior components create an efficient reliable unit.This design eliminates the need for any interior or exterior renovation. Use of the existing wall sleeve-cabinet and louver saves time and money, two very important factors in today’s competitive environment! If the need does occur where the room cabinet needs to be replaced, we manufacture them, as well as a square or rectangle control box.
Available in cooling-only and cooling-plus hydronic heat models
- Cooling from: 7700-15000 Btu
- Heating: 6300-13300 Btu
- Comfort & Dehumidification
- Quieter operation
- Intuitive controls
- Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
- Separate thermostat settings (limiting) for cooling and heating nodes
- Samples the room temperature every 9 minutes to monitor and maintain desired temperature
- “Instant Heat” in heat pump mode quickly heats a room to the desired temperature
- Dehumidification mode removes up to 3.2 pts per hour
- Optional constant fan mode for additional comfort options
- Reversible indoor air louvers for an additional airflow direction option
- Sound Reduction Technology
- New 2-motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
- The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
- Permanently lubricated dual motors reduce noise
- New elongated fan moves air over a wider area so it’s quieter
- Fan turns on before the compressor starts to muffle the sound
- High-density insulation helps keep outdoor noise outside
- Commercial Grade Construction
- Islandaire’s advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
- Faultless surehold Front cover system attaches securely
- Room Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
- Random compressor resistant protectselectrical systems
- Indoor coil frost sensor protects the compressor
- Durable front panel with break-proof control door and design
- Permanently lubricated fan motors
- Tamper-resistant grille
- Durable, powder coat paint finish
- Health and IAQ
- Fresh-air vent
- Two washable, antimicrobial filters
- Energy Usage: Management
- Set separate heat and cool range limits
- Desk control ready
- Energy Management System Compatible
- Electronic defrost control
- Maintenance and Installation Features
- Service error code storage
- May be installed flush with floor
- Reversible indoor air louvers
- Improved weather barrier
- Nationwide Service Network
- Modular design and pop out wiring modules
-
Perfect replacement unit for The Friedrich CM701. Our commercial duty construction with heavy gauge galvanized steel and superior components create an efficient reliable unit. This design eliminates the need for any interior or exterior renovation. Available with electric heat with heat pump or cooling only.
Available in cooling and hydronic heat models
- Cooling from: 7700-15000 Btu
- Heating: 6300-17000 Btu
- Comfort & Dehumidification
- Quiet operation
- Intuitive digital or analog controls
- Even heat monitoring checks room temperature and automatically adds a heat boost if necessary
- Separate thermostat settings (limiting) for cooling and heating modes (digital only)
- Samples the room temperature in intervals to monitor and maintain desired temperature
- Optional constant fan mode for additional comfort options
- Reversible indoor air louvers for an additional airflow direction option
- Sound Reduction Technology
- New 2-motor design allows the indoor motor to run at slower speeds, which reduces indoor sound levels
- The quiet, efficient compressor is mounted on vibration isolators, which absorb vibration-causing noise
- Permanently lubricated dual motors reduce noise
- High-density insulation helps keep outdoor noise outside
- Commercial Grade Construction
- Islandaire’s advanced anti-corrosion protection protects the outdoor coil against deterioration and extends unit life, especially in harsh coastal environments
- Freeze Protection initiates heat if room temperature falls to 40 °F in an unoccupied room
- Indoor coil frost sensor protects the compressor
- Permanently lubricated fan motors
- Tamper-resistant grille
- Durable, powder coat paint finish
- Health and IAQ
- Fresh-air vent
- Washable, antimicrobial filters
- Energy Usage: Management
- Set separate heat and cool range limits (digital only)
- Desk control ready
- Energy Management System Compatible
- Maintenance and Installation Features
- Service error codes for quick diagnostics
- May be installed flush with floor
- Improved weather barrier
- Nationwide Service Network
- Modular design and pop out wiring modules